Are you looking for:
ESCO Balancing Beads consist of thousands of uniquely designed beads that will automatically adjust to the imbalance of the tire based on the principle of centrifugal force. The ESCO Balancing Beads naturally find the unbalanced side of the tire and gather together to create a counter-weight that balances the tire regardless of changes in the tire weight due to normal conditions.
When lead, steel, and other material wheel weights are applied to the rim, they are placed in the position that is opposite of the imbalanced side of the tire. With ESCO Balancing Beads, the process is down internally just the same as wheel weights. The big difference is ESCO Balancing Beads balance the tire for the life of the tire and adapt as the outside rubber of the tire wears down with time.
Benefits
- Improve Fuel Economy
- Increase Tire Life
- Reduce Vibration
- Reduce Maintenance Costs
- Easy to Install and Maintain
- Environmentally Friendly
- Only one bag per wheel
- Beads are static free and roll freely to keep tires balanced as the tire naturally matures
- ESCO Tire Balancing Beads are reusable
- Made of Eco Friendly Material
- Can be used in Tractor Trailers, RV, Motorcycle, and small Truck tires
- Will not clump or clog valve stems
Comes in bucket with 17.6 lbs of balance beads.
One scoop = 3 ounces
How to Install ESCO Balancing Beads:
Installation of ESCO Balancing Beads is as simple as opening the package and placing the inner bag into the broken down tire. ESCO Balancing Beads can also be injected through the valve stem. For better fuel economy, increase in tire life, and to eliminate "wheel vibration" ESCO recommends putting a bag of balancing compound in all wheel assemblies on the vehicle.
Kiene 1-3/4" Diameter Splined Shaft with 0.98" diameter pilot for the Clutch Caddy
- For 0.980" Pilot
- Steel construction not plastic
Clutch Caddy Sold Separately
Removes the most difficult and rusted slack adjuster quickly. An ingenious feature of the slack adjuster puller and the brake clevis pin press is the self-aligning bolt which quickly positions the turning bolt for each tools specific application.
A jump starting solution for repair shops, parking lots and garages. While not designed for continuous jump starts, the Boost•All® offers economy without skimping on quality. This unit provides 12/24V, battery powered jump starting in a narrow, 20” wide portable unit with makes maneuvering between rows of parked vehicles a snap.
- Fully automatic internal AC charger to keep battery in ready-to-use condition.
- Extra large pneumatic tires for easy mobility.
- Volt metered to monitor battery charge level of the Boost•All® or vehicle.
Requires 2 group 31 AGM batteries, 3/8" threaded top post, 900 CCA or higher (batteries not included).
- Power Source: (2) Group 31 AGM Batteries
- Jump Starting: 12/24 Volt
- Cables: 10' 4/0 ga.
- Clamps: 1,000 AMP
- Dimensions: 20" W x 26" D x 48" H